Ağırlık:
0,316 kg
Akış:
maks.
Akış hızı:
3 m (10 ft.) per second, maximum
Basınç aralığı:
Maks. 10,7 bar Yalnızca sensör (montaj donanımının basınç aralığı ayrı olarak kontrol edilmelidir)
Compliance:
Hazardous location, Maritime, CE
Doğruluk:
± 0,02 pH
Elektrot tipi:
General Purpose
Garanti:
24 aylar
Gövde malzemesi:
PPS
Hassasiyet:
± 0,01 pH
İletim mesafesi:
1000 m (3280 ft.) Termination Box kullanıldığında maksimum
100 m (328 ft.), maksimum
İletişim:
Modbus
İşletme sıcaklık aralığı:
-5 - 70 °C (23 - 158 °F) pHD and ORP
0 - 50 °C (32 - 122 °F) SS pHD
Before initial pH calibration, calibrate the temperature measurement when the sensor is in water or buffer which is at approximately the same temperature as the pH buffers (matches current recommendation)
Kablo bağlantısı:
Digital
Kablo Uzunluğu:
10 m PUR (polyurethane) 4-conductor with one shield, rated to 105°C
Kalibrasyon metodu:
İki noktalı otomatik, bir noktalı otomatik, iki noktalı manuel, bir noktalı manuel.
Kayma:
0.03 pH her 24 saat için, kümülatif olmayan
Malzeme:
Topraklama Elektrodu: Titanyum
Montaj biçimi:
Convertible
Numune ile temasta olan malzemeler:
PEEK or PPS, salt bridge of matching material with PVDF junction, glass process electrode, titanium ground electrode, and FKM/FPM O-ring seals (pH sensor with optional HF-resistant glass process electrode has 316 stainless steel ground electrode, and perfluoroelastomer wetted O-rings; consult factory for other available wetted O-ring materials)
Ölçüm aralığı:
-2.0 to 14.0 pH
Saklama koşulları:
4 - 70 °C, 0 - 95% relative humidity (non-condensing)
Sensör kablosu:
10 m poliüretan, bir korumalı 4 iletkenli kablo, derecesi 105 °C
Sensör vidası:
Her iki uçta NPT
Sıcaklık doğruluğu:
± 0.5 °C (± 0.9 °F)
Sıcaklık kompanzasyonu:
NTC 300 Ω termistör ile otomatik veya kullanıcının girdiği sıcaklıkta manuel olarak sabitlenir
Sıcaklık sensörü:
Otomatik sıcaklık telafisi ve analizör sıcaklık okuması için NTC 300 Ω termistör
Tekrarlanabilirlik:
± 0.05 pH
Uzunluk:
271.3 mm