The EZ Series Online Analysers offer multiple options to monitor Sulphide in water. Typical applications are wastewater, drinking water, surface water.
The EZ3000 Series Analysers use direct ISE analysis: - EZ3017, standard measuring range: 1 - 10 mg/L - EZ3018, standard measuring range: 10 - 100 mg/L - EZ3019, standard measuring range: 100 - 1000 mg/L
The EZ3500 Series Analysers use ISE measurement with standard addition: - EZ3518, standard measuring range: 1 - 10 mg/L - EZ3519, standard measuring range: 10 - 100 mg/L - EZ3520, standard measuring range: 100 - 1000 mg/L
Options for the EZ3xxx: - Calibration to 25% or 50% of standard range
The EZ4000 Series Sulphide Analysers are single-parameter titrators: EZ4031 Sulphide, standard measuring range: 0 - 500 mg/L EZ4032 Sulphide, standard measuring range: 0 - 1000 mg/L
Options for the EZ4xxx: - Calibration to 10%, 25% or 50% of standard range
Options for all analysers include: - Multiple stream analysis (1-8 streams) reducing cost per sampling point - Analogue and/or digital outputs for communication
Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample preconditioning page.
Use the filters in the table below to find your Sulfide analyser. Need support or a different configuration? Please contact us.
+90 (0) 312 490 83 00
Başka bir sorunuz var mı? Lütfen daha fazla iletişim bilgisi için tıklayın