EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA

EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA
Ürün Numarası: EZ3508.9800140T
Birim Fiyat Bize Ulaşın

Consistent Results in Challenging Conditions

Fluctuating water quality often compromises conventional monitoring, leading to unstable readings. The EZ3508sc uses discontinuous and standard addition modes to compensate for these matrix interferences. You get accurate, continuous fluoride data for stable process control, even as conditions change.

Reduced Maintenance and Manual Effort

Gel-filled ion selective electrodes eliminate electrolyte refilling, while automated cleaning and calibration reduce routine service needs. Discontinuous standard addition method optimises buffer and reagent consumption; lowering site visits, operating costs, and overall maintenance effort.

Seamless Integration and Connectivity

Isolated data makes process control and reporting difficult. The integrated controller platform supports standard digital communication protocols for easy connection to your existing network. You gain immediate access to critical insights, supporting faster decision-making and remote troubleshooting.

Streamlined Operation and Usability

Complex instrumentation often leads to training bottlenecks and operational errors. The unified controller interface simplifies setup and daily interaction. Operators of any experience level can easily manage the system, reducing training requirements and preventing errors during routine checks.

Kutudakiler

EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode, 1 x empty 5L Reagent Container with Fittings (for F Standard Solution) and 1 x empty 10L Reagent Container with Fittings (for Buffer Solution)

Teknik özellikler

Ağırlık: Max. 35 kg
Akış Hızı: 100 - 300 mL/min
Analog çıkışlar: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
Boyut (Y x G x D): 688 mm x 460 mm x 340 mm
Cihaz havası: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Demineralize su: Internal dilution option: Rinse water and Dilution water
Dijital çıkışlar: Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)

Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP

RS485 communication: Profibus DP or Modbus RTU
Doğrulama: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Doğruluk: Better than 2% full scale range for standard test solutions
Drenaj: Atmospheric pressure, vented, min. Ø 32 mm
Enerji: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Garanti: 24 aylar
Girişimler: Metal ions like aluminium [(Al)³+] > 72 mg/L, calcium [(Ca)²+] > 108 mg/L and iron [(Fe)²+/(Fe)³+] > 150 mg/L. Fats, oil, proteins, surfactants and tar.
Kalibrasyon: Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Koruma sınıfı: IP44
Kutudakiler: EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode, 1 x empty 5L Reagent Container with Fittings (for F Standard Solution) and 1 x empty 10L Reagent Container with Fittings (for Buffer Solution)
Malzeme: Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
Numune akışı sayısı: Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Numune basıncı: By external overflow vessel (open to atmospheric pressure)
Numune kalitesi: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Numune sıcaklığı: 10 - 30 °C
Ölçüm aralığı: No dilution
0.2 - 10 mg/L Fˉ
0.5 - 25 mg/L Fˉ
1 -50 mg/L Fˉ
2 - 100 mg/L Fˉ

Internal dilution
10 - 500 mg/L Fˉ
20 - 1000 mg/L Fˉ
Ölçüm metodu: Discontinuous measurement by combined Ion-Selective Electrode with standard addition
  Ion-Selective Electrode (standard addition)
Ölçüm süresi: No dilution
Default: 5 minutes
Continuous: 5 minutes

Internal dilution
Default: 10 minutes
Continuous: 8 minutes
Ortam sıcaklığı: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Otomatik temizleme: Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Parametre: Fluoride
Reaktif gereksinimi: Keep between 10 - 30 °C
Saptama limiti: No dilution
0.2 - 10 mg/L Fˉ: 0.2 mg/L
0.5 - 25 mg/L Fˉ: 0.5 mg/L
1 -50 mg/L Fˉ: 1 mg/L
2 - 100 mg/L Fˉ: 2 mg/L

Internal dilution
10 - 500 mg/L Fˉ: 10 mg/L
20 - 1000 mg/L Fˉ: 20 mg/L
Sertifikalar: CE, ETL certified to UL and CSA safety standards, UKCA
Toprak bağlantısı: Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²