EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA

EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA
Ürün Numarası: EZ3008.9800140T
Birim Fiyat Bize Ulaşın

Stable Performance in Changing Conditions

The EZ3008sc delivers temperature controlled, discontinuous fluoride measurements with multi stream capability. Operators get stable, reliable data during process fluctuations, reducing manual checks and adjustments while maintaining confident day to day water quality control.

Reduced Maintenance and Service Costs

Designed for long-term operation, the analyser uses gel-filled ion-selective electrodes that eliminate the need for electrolyte refilling. This technology reduces reagent consumption, routine service interventions, maximises analyser uptime, and lowers the total cost of ownership over the instrument’s lifetime.

Flexible Connectivity for Legacy and Modern Platforms

Integrate seamlessly into existing PLC, SCADA, DCS and plant network architectures with a built-in industrial panel PC. Real-time data transmission provides immediate visibility into diagnostics and status, enabling faster responses and improved decision-making across your facility.

Flexible Analysis for Multiple Streams

Conduct quick spot checks and investigations without interrupting routine monitoring using built-in grab sampling. When combined with the optional 8-channel sample stream, one analyser sequentially measures multiple process points: maximising asset utilization and coverage while simplifying your system architecture.

Kutudakiler

EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Fluoride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)

Teknik özellikler

Ağırlık: Max. 35 kg
Akış Hızı: 100 - 300 mL/min
Analog çıkışlar: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
Boyut (Y x G x D): 688 mm x 460 mm x 340 mm
Cihaz havası: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Demineralize su: Does not apply
Dijital çıkışlar: Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)

Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP

RS485 communication: Profibus DP or Modbus RTU
Doğrulama: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Doğruluk: Better than 2% full scale range for standard test solutions
Drenaj: Atmospheric pressure, vented, min. Ø 32 mm
Enerji: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Garanti: 24 aylar
Girişimler: Metal ions like aluminium [(Al)³+] > 72 mg/L, calcium [(Ca)²+] > 108 mg/L and iron [(Fe)²+/(Fe)³+] > 150 mg/L. Fats, oil, proteins, surfactants and tar.
Kalibrasyon: Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Koruma sınıfı: IP44
Kutudakiler: EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Fluoride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)
Malzeme: Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
Numune akışı sayısı: Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Numune basıncı: By external overflow vessel (open to atmospheric pressure)
Numune kalitesi: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Numune sıcaklığı: 10 - 30 °C
Ölçüm aralığı: 0.05 - 2.5 mg/L Fˉ
0.1 - 5 mg/L Fˉ
0.2 - 10 mg/L Fˉ
Ölçüm metodu: Discontinuous, direct measurement by combined Ion-Selective Electrode
  Ion-Selective Electrode
Ölçüm süresi: Default: 5 minutes
Continuous: 5 minutes
Ortam sıcaklığı: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Otomatik temizleme: Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Parametre: Fluoride
Reaktif gereksinimi: Keep between 10 - 30 °C
Saptama limiti: 0.05 - 2.5 mg/L Fˉ: 0.05 mg/L
0.1 - 5 mg/L Fˉ: 0.1 mg/L
0.2 - 10 mg/L Fˉ: 0.2 mg/L
Sertifikalar: CE, ETL certified to UL and CSA safety standards, UKCA
Toprak bağlantısı: Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²