EZ1016sc Total Hardness Analyser

EZ1016sc Total Hardness Analyser
Ürün Numarası: EZ1016.XXXXXXXT
Birim Fiyat Bize Ulaşın

Teknik özellikler

Ağırlık: 25 kg
Akış Hızı: 100 - 300 mL/min
Alarm : Malfunction, maintenance, analyser busy
Analog çıkışlar: Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)
Boyut (Y x G x D): 690 mm x 465 mm x 330 mm
Cihaz havası: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air
Demineralize su: For rinsing / dilution
Dijital çıkışlar: Optional: Modbus (TCP/IP, RTU/RS485), Profinet, Profibus DP, Ethernet/IP
Doğrulama: Automatic; frequency freely programmable
Doğruluk: Better than 2% full scale range for standard test solutions
Drenaj: Atmospheric pressure, vented, min. Ø 32 mm
Enerji: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Garanti: 24 aylar
Girişimler: Some metal ions interfere by causing fading or indistinct end points or by stoichiometric consumption of EDTA. Large amounts of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar.
Kalibrasyon: Automatic, 2-point; frequency freely programmable
Koruma sınıfı: IP44
Malzeme: Hinged part: Thermoform ABS, door: PMMA
Wall section: galvanised steel, powder coated
Metot: Colorimetric
Model: EZ1016sc
Numune akışı sayısı: 1, 2, 4, or 8
Numune basıncı: By external overflow vessel
Numune kalitesi: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Numune sıcaklığı: 10 - 30 °C
Ölçüm aralığı: 0,05 - 1 mg/L CaCO3

Optional (with internal dilution):
0,025 - 0,25 mg/L
0,025 - 0,5 mg/L
0,5 - 10 mg/L
1,25 - 25 mg/L
2,5 - 50 mg/L
3,75 - 75 mg/L
5,0 - 100 mg/L
  0.025 - 1 mg/L CaCO₃
Ölçüm metodu: Colorimetric measurement at 610 nm using calmagite/EDTA
Ölçüm süresi: 10 min (dilution + 5 min.)
Ortam sıcaklığı: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Otomatik temizleme: Evet
Parametre: Total Hardness
Reaktif gereksinimi: Keep between 10 - 30 °C
Saptama limiti: ≤ 2.5 µg/L CaCO3
Sertifikalar: CE compliant / ETL certified
Toprak bağlantısı: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²